WERA Safe-Torque A 2 torque wrench with 1/4″ hexagon drive, 2-12 Nm 05075801001

FEATURES:

• Slip-over release mechanism – the set torque can never be overtightened
• Torque Lock Function: The torque function can be deactivated and the tool can then be used as a standard ratchet with high loosening moments and for applications with defined angles of rotation
• For controlled clockwise or counterclockwise torque operation – tightening and loosening with or without torque
• Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values
• After the target torque has been reached, the release angle is only 30 degrees
• The fine toothing with 72 teeth allows for a low return angle of 5 degrees
• 1/4″ hexagon drive for the use of 1/4″ bits

Torque wrench with slide-over mechanism. Once the set torque has been reached, the tool cannot be overtightened, so that excessive torque cannot be applied. Setting range of 2 to 12 Nm for controlled clockwise and counterclockwise torque operation. Easy setting and saving of the default value: The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. With Torque Lock function for use as a standard ratchet without torque function. Thus also usable for applications with angles of rotation. The return angle of only 5 degree allows the ratchet to be used even in confined spaces.