The 40V max XGT Brushless Cordless 1-1/8-Inch Rotary Hammer Kit (HR007GZ) is a cordless concrete solution engineered for heavy-load applications. It delivers the power, speed, and run-time for corded demands, and features a convenient D-handle design that is ideal for overhead, downward or hard-to-reach horizontal drilling/chipping applications. The Makita-built brushless motor delivers a full 2.7 ft. lbs. of impact energy, with 0-980 RPM and 0-5,000 BPM. Constant speed control automatically applies additional power under load for optimum performance. It’s equipped with Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration.

Features:

• Work efficiency the same or higher than that of HR001G
• Compatible with the same dust collection system as used for HR2663 series
• BL motor delivers high power and excellent performance
• Active Feedback sensing Technology (AFT) for kickback reduction
• Auto-start Wireless System (AWS) connects to compatible vacuum cleaner with Bluetooth
• Anti-Vibration Technology (AVT), Equipped with anti-vibration main handle and side handle to reduce vibration to operators hands
• For less hand and arm fatigue from long continuous operation
• 3-mode operation, “rotation only”, “hammering with rotation” and “hammering only”
• Built-in torque limiter clutch disengages motor should bit bind
• Soft grip handle provides increased comfort on the job
• LED light illuminates drilling surface for more productivity in low light applications
• One touch sliding chuck enables quick and easy bit changes
• Depth gauge for increased drilling consistency
• Variable speed trigger allows operator to adjust speed based on materials or application
• Conveniently located push button for rotation reverse
• Electric brake for maximum productivity
• Extreme Protection Technology (XPT) engineered to provide increased dust and water resistance
• Battery protection circuit protects against overloading, over-discharging and over-heating

Specifications:

Type: Brushless SDS-Plus Shank
Bare Tool/Kit: Tool
Tool Type: Hammer
Capacity: 1-1/8 in Masonry, 1/2 in Steel, 1-1/4 in Wood, 2-1/8 in Core Bit, 2-9/16 in Bit
Blows per Minute: 0-5000 bpm
No-Load Speed: 0-980 rpm
Maximum Output: 850 W
Voltage Rating: 40 V
Vibration Level: 8.6 m/sq-s
Sound Level: 105 dBA
Overall Length: 18 in
Overall Width: 4 in
Overall Height: 7-1/4 in
Includes: Air Duct Cap, Depth Gauge, Cloth, 194683-7 100 mL Grease