MST-BAR 10 mm x 10 ft. Fibreglass Rebar is a proven economical solution to reinforcing concrete structure. With a life span of more than 100 years, MST-BAR is more durable & much longer lasting solution over galvanized, epoxy coated and stainless steel. Approved & Manufactured in compliance with CSA S807 & ACI 440.

Features

• 100 % Non-Corrosive
• Non-Magnetic
• Stronger than steel
• Light weight -1/4 the weight of Steel
• Electrical insulator
• Thermal insulator
• Can be cut using steel saw, a band saw and or grinder with a diamond blade
• Same installation as steel rebar but does not require bends
• Much higher fatigue resistance than steel
• Made in Canada

Specifications

Tensile Strength 1000 Mpa (145 ksi) Bond Strength to Concrete 20 Mpa Minimum (2900 Psi Minimum) Tensile Modulus 65 Gpa (9427 ksi) Tensile Load 74 kN (16636 lbf) Ultimate Strain (efu) 1.5 % Resistance to Alkali Environment +90% of ultimate tensile capacity after 2160 hours of direct exposure to an alkali solution with a pH level of 13 at 60 degrees Celsius Minimum Operating Temperature -40 degrees Celsius with Zero effect Applications Bridges, EMI & RFI Applications, Water Treatment, Dams, Parking garages, Tunnel Applications, Roads, Medical Technology Centers and more Meets Many Standards CSA-S6-06, CSA-S806-02, ISIS Design Manual No. 3, ISIS Design Manual No. 5, ACI 440.1R-06, ACI 440R-07, ACI 440.5-08, ACI 440.6-08, AASHTO GFRP-1 Storage Long-term outdoor storage requires tarping to prevent UV damage