DuraDrive 3/8in.x 2 in. Mushroom Head Hammer Strike Anchor (25-Pack)

DuraDrive 3/8in. x 2 in. Carbon Steel Mushroom Head Hammer Strike Nail Anchor is good for general purpose anchoring in concrete, block, brick or stone. It can be used light-duty, tamperproof applications. The anchor has a pre-expanded bend at the bottom of the anchor which straightens out to conform to the walls of the hole when hammered into the proper size pre-drilled hole. The anchor will always try to regain its pre-expanded bend which causes constant expansion pressure within the hole. This eliminates the need for any additional tightening or secondary setting operation. The anchor is not recommended for overhead, life-safety or sustained tensile loading applications.

Features:

• General purpose anchoring
• Zamac Alloy body with carbon steel drive nail
• General applications include roof flashing, furring strips, mechanical attachments, electrical fixtures, maintenance, brick ties, and masonry anchorage

Specifications:

Application Medium Duty Diameter (in.) 3/8in. Finish Carbon Steel Length (in.) 2in. Material Steel Maximum Weight Capacity See Technical Data Sheet Measure Type Imperial Technical Data Sheet DuraDrive Strike Anchor TDS Used For: Concrete & Masonry