Gedore 2489708 Set of 7 Sleeve, Mercedes Sprinter / VW Crafter – GD KL-0039-7533

The KL-0039-7533 sleeve set used in conjunction with a GEDORE Automotive press frame of the KL-0039. or KL-0043. Series and 17 t hydraulic cylinder KL-0040-2500 enables the specified suspension ball joints to be pressed into and pressed out from the lower wishbone quickly and without any trouble. Removal and installation of the suspension ball joints can be carried out in-situ on the vehicle. Removal and installation of the suspension ball joints can be carried out in-situ on the vehicle.

Features:

• Suitable for Mercedes Sprinter (W901 – W907) and VW LT / Crafter (2D, 2E, 2F) front axle
• For a quick and secure removal and installation of the suspension joint on the front lower wishbone
• No removal of the wishbone required
• Additional drive parts required (mechanical or hydraulic)
• Suitable for the lower suspension joint on the front axle wishbone, e.g. with Mercedes Sprinter (W901, W902, W903, W904, W906, W907) as well as VW Crafter (2E/2F), VW LT (2D)

Specifications:

• Suitability: VW, Mercedes
• Drive Type: Hydraulic, Mechanical
• Weight: 11.25 lbs
• Country of Origin: Germany

Scope of Delivery:

1 x KL-0039-1828-1 – Support sleeve, diameter 60mm, 1 x KL-0039-1823-3 – Spring washer, 1 x KL-0039-1823-4 – Cylinder screw, M10 x 120, 1 x KL-0039-1823-5 – Spacer tube, 1 x KL-0039-1829 – Pressure sleeve, 1 x KL-0039-1762 – Pressure sleeve diameter 62mm, long, 1 x KL-0039-1662 – Support sleeve diameter 62mm, short